openSUSE Forums: 12.3 milestone 2 - Unable to go through install process due to graphic problem.

openSUSE Forums openSUSE Forums

12.3 milestone 2 - Unable to go through install process due to graphic problem. Dec 18th 2012, 22:30 This is specific from 12.x ( it was ok until 11.4 ) and it is still true for 12.3 milestone 2. The first stage until the first reboot is OK. Due to garbage screen it impossible to see what happens during the first reboot. So I decide to reinstall and set run level to 3. Same problem. It is impossible to see what happens during the first reboot because as soon as the graphic driver is loaded, the screen becomes unreadable ( colored rectangular blocks everywhere ). One must boot with failsafe 1°) Is there a possibility to tell the system that it must reboot in fail safe mode before finishing the install process ? 2°) Presently I am not sure that this current install is OK . If I compare from my 2 others linux box : On the 3rd box ( No update have been made. First reboot state ) A) /var/log/localmessage is missing /var/log/warn is missing /var/log/zypper is missing B) Network is not configured. Must do that manually and reboot I would like to make an install from begin to end . Hardware : Toshiba - Qosmio X 500 - PQX33E-01V008FR 8Go ram 8 core processor intel cpu family : 6 model : 30 model name : Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping : 5 microcode : 0x5 cpu MHz : 1600.000 cache size : 6144 KB Nvidia GTS 360M detected as Model: NVIDIA GT 215 Board

You are receiving this email because you subscribed to this feed at blogtrottr.com. If you no longer wish to receive these emails, you can unsubscribe from this feed, or manage all your subscriptions