Failes to boot up after upgrade Jan 15th 2013, 07:46 Dear all, unti last night I was using opensuse 12.1 . at grub I receive the following messages (as system is down and could not copy paste please find screnhots)before booting halts. ImageShack® - Online Photo and Video Hosting Other files needed for troubleshooting are given below Code:
# Modified by YaST2. Last modification on Mon Jan 14 17:49:18 CET 2013 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # For the new kernel it try to figure out old parameters. In case we are not able to recognize it (e.g. change of flavor or strange install order ) it it use as fallback installation parameters from /etc/sysconfig/bootloader default 2 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,1)/message ##YaST - activate ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 12.1 - 3.4.11-2.16 (default) root (hd0,1) kernel /vmlinuz-3.4.11-2.16-default root=/dev/sda3 splash=0 resume=/dev/sda6 splash=silent quiet showopts vga=0x31a initrd /initrd-3.4.11-2.16-default ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 12.1 - 3.4.11-2.16 (default) root (hd0,1) kernel /vmlinuz-3.4.11-2.16-default root=/dev/sda3 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a initrd /initrd-3.4.11-2.16-default ###Don't change this comment - YaST2 identifier: Original name: linux### title Desktop -- openSUSE 12.1 - 3.4.11-2.16 root (hd0,1) kernel /vmlinuz-3.4.11-2.16-desktop root=/dev/sda3 splash=0 resume=/dev/sda6 splash=silent quiet showopts vga=0x31a initrd /initrd-3.4.11-2.16-desktop ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 12.1 - 3.4.11-2.16 (desktop) root (hd0,1) kernel /vmlinuz-3.4.11-2.16-desktop root=/dev/sda3 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a initrd /initrd-3.4.11-2.16-desktop ###Don't change this comment - YaST2 identifier: Original name: floppy### title Diskette rootnoverify (fd0) chainloader +1 ###Don't change this comment - YaST2 identifier: Original name: other### title Windows 7 map (hd0) (hd0) map (hd0) (hd0) rootnoverify (hd0,0) makeactive chainloader +1 Code:
device.map (fd0) /dev/fd0 (hd0) /dev/disk/by-id/ata-WDC_WD20EVDS-63T3B0_WD-WCAVY6660374 ~
Code:
linux:/home/linux # fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0000a718 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 526353659 1028160 83 Linux /dev/sda3 526353660 780309179 126977760 83 Linux /dev/sda4 780309180 3907024064 1563357442+ f W95 Ext'd (LBA) /dev/sda5 780309243 3894156062 1556923410 83 Linux /dev/sda6 3894157312 3907022847 6432768 82 Linux swap / Solaris Disk /dev/sdb: 32.0 GB, 32015122432 bytes 21 heads, 21 sectors/track, 141790 cylinders, total 62529536 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 62529535 31260736 c W95 FAT32 (LBA) contents of boot partitions and the contents of boot directory Code:
-rw------- 1 root root 512 Nov 3 10:22 backup_mbr lrwxrwxrwx 1 root root 1 Aug 29 05:38 boot -> . -rw-r--r-- 1 root root 1236 Oct 25 2011 boot.readme -rw-r--r-- 1 root root 131150 Oct 4 20:56 config-3.4.11-2.16-default -rw-r--r-- 1 root root 131351 Oct 4 20:56 config-3.4.11-2.16-desktop drwxr-xr-x 2 root root 4096 Jan 15 07:31 grub lrwxrwxrwx 1 root root 26 Jan 14 16:49 initrd -> initrd-3.4.11-2.16-default -rw-r--r-- 1 root root 13668583 Jan 14 16:50 initrd-3.4.11-2.16-default -rw-r--r-- 1 root root 13314471 Jan 14 16:51 initrd-3.4.11-2.16-desktop drwx------ 2 root root 16384 Aug 28 12:19 lost+found -rw-r--r-- 1 root root 582656 Jan 14 16:44 message -rw-r--r-- 1 root root 634719 Oct 4 22:08 symtypes-3.4.11-2.16-default.gz -rw-r--r-- 1 root root 635604 Oct 4 23:02 symtypes-3.4.11-2.16-desktop.gz -rw-r--r-- 1 root root 222417 Oct 4 22:04 symvers-3.4.11-2.16-default.gz -rw-r--r-- 1 root root 222379 Oct 4 22:51 symvers-3.4.11-2.16-desktop.gz -rw-r--r-- 1 root root 409 Oct 4 22:04 sysctl.conf-3.4.11-2.16-default -rw-r--r-- 1 root root 520 Oct 4 22:51 sysctl.conf-3.4.11-2.16-desktop -rw-r--r-- 1 root root 2405545 Oct 4 21:52 System.map-3.4.11-2.16-default -rw-r--r-- 1 root root 2487319 Oct 4 22:30 System.map-3.4.11-2.16-desktop -rw-r--r-- 1 root root 5467969 Oct 4 22:04 vmlinux-3.4.11-2.16-default.gz -rw-r--r-- 1 root root 5719500 Oct 4 22:50 vmlinux-3.4.11-2.16-desktop.gz lrwxrwxrwx 1 root root 27 Jan 14 16:49 vmlinuz -> vmlinuz-3.4.11-2.16-default -rw-r--r-- 1 root root 4694960 Oct 4 21:52 vmlinuz-3.4.11-2.16-default -rw-r--r-- 1 root root 4919280 Oct 4 22:30 vmlinuz-3.4.11-2.16-desktop What else do you think might be needed to fix that ? Regards Alex | |
No comments:
Post a Comment